丰满少妇被猛烈进入无码,国产精品亚洲欧美在线播放操,无遮挡又黄又刺激又爽的视频,久久久久亚洲AV成人

Welcome to Shenzhen Zhongyuan Plastic Co., Ltd!

News



Tel:(0755)27151698
Fax:(0755)27150611
Mailbox:szzyzcl@163.com / szzy@szzy99.com
Add:Building A1 and A2, No.1 Industrial Zone, yuliu property company, Gongming town, Bao'an District, Shenzhen
Industry information

當前位置:

首頁 News Industry information

Phenomena in injection molding process

Release time:2022-03-07

The key link of injection molding is to make various forms of plastic into products or blanks with required shapes. There are more than 30 injection molding methods. Its choice mainly depends on the type of plastic, the initial shape, and the shape and size of the product. Today, the injection molding factory introduces 25 phenomena in the injection molding process:

1. Insufficient injection molding: in plastic processing, the appearance of plastic parts is incomplete due to insufficient cavity filling.

2. Overflow: excess material that overflows into the gap between the clamping surfaces of the mold and remains on the plastic parts in the process of plastic processing and molding.

3. Weld marks: linear marks on the surface of plastic parts, which are formed by the shunting and confluence of several streams in the desert during the injection or extrusion process. The melt does not melt completely at the interface and cannot fuse together, resulting in fusion marks, which will affect the appearance quality and mechanical properties of plastic parts.

4. Wave flow mark: improper melt flow in the mold cavity leads to uneven ring, spiral or cloud shaped waveforms and other defects on the surface of plastic parts.

5. Surface turbidity: refers to cracks and damage caused by cracks on the surface of plastic parts. The phenomenon of cracks on the outside or inside of plastic parts due to long-term or repeated application of stresses lower than the mechanical properties of plastic is called stress cracking. The phenomenon that plastic parts suddenly and completely break due to dead load at a certain temperature is called stress fracture. Cracks and fractures caused by overexposure of some thermoplastic parts at high temperature are called thermal stress cracks.

6. Fracturing: it refers to that through the resin layer covering the surface, one or more layers of reinforcing materials outside the laminated plastic can be seen to have obvious cracks.

7. Wrinkling: surface cracks and obvious separation defects of laminated plastics.

8. Wrinkle: in the process of plastic processing, one or more layers of plastic parts have wrinkles or wrinkled appearance defects.

9. Cracking and whitening: obvious micro cracks on the surface of plastic parts are called cracks, and frost like micro cracks similar to cracks are called whitening. Cracks and albinism are microcracks without cracks. When plastic parts are exposed to certain chemical environment or stress conditions, environmental stress cracking will occur.

10. Silver thread: needle like silver white frost like fine lines on the surface of plastic parts along the direction of material flow.

11. Stripe: linear stripe defect on the surface or inside of plastic parts.

12. Spots: due to poor dispersion or mixing of pigments, there are mica flake like black spots on the surface of plastic parts.

13. Orange peel: surface appearance defects of plastic parts similar to orange peel.

14. Bubble stripe: refers to the bubble layer in foam that is completely different from its inherent bubble structure.

15. Black spots: in the process of plastic processing and molding, the melt is overheated and decomposed under high temperature and pressure, resulting in black carbonization spots on the surface of plastic parts.

16. White spots or bright spots: transparent or translucent plastic films, sheets or plastic parts contain particles with insufficient plasticization, and white spots can be seen when light is transmitted, which is called "fish eyes". If the material is opaque or colored, these spots are called white spots or bright spots.

17. Pitting: regular or irregular pits on the surface of plastic parts, usually with the same depth and width.

18. Filling point: obvious spots on plastic parts when there are wood powder or asbestos and other filling materials.

19. Dark spots: dark spots that appear in the fabric base pressing structure.

20. Scorch and spots: during plastic processing, under the conditions of high temperature and high pressure molding, the melt is carbonized due to overheating decomposition, and the carbonized coke is mixed into the melt, resulting in spotted defects on the surface and inside of plastic parts.

21. Bubbles: in the process of plastic processing and filling, if a large amount of gas remains in the melt or the air in the mold cavity is not all discharged, the defects of small volume or a series of pores will be formed in the molded plastic parts.

22. Vacuum bubble or dark bubble: when plastic parts are cooled and solidified during plastic processing, sometimes the outer surface has been cooled and solidified, but the interior is still in a hot-melt state. Once the central part cools and shrinks, vacuum holes will be generated inside the plastic parts, commonly known as vacuum bubbles or dark bubbles, also known as shrinkage holes.

23. Pinhole: there is a pinhole size through hole defect on the plastic sheet or film.

24. Bubble collapse: in the manufacturing process of foamed plastics, the defect of local density increase due to the destruction of bubble structure.

25. Depression and shrinkage: during the cooling process of plastic processing, the surface layer is cooled and solidified first, and the internal or wall thickness part is cooled and solidified later, so that the internal and external shrinkage speed is inconsistent during volume shrinkage, and the surface layer of plastic parts is stretched inward to form depression, resulting in shallow pits or pits.

Copyright: Shenzhen Zhongyuan Plastic Co., Ltd. | mold processing customized manufacturer. If you want to know the processing price of the factory, how much is it, and which is good, please contact us Yue ICP Bei No. 17060480
国产黄污网站在线观看-成人av电影中文字幕| 国产一区二区三区噜噜-精品久久亚洲一区二区欧美| 青木玲高清中文字幕在线看-视频在线免费观看你懂的| 三级a级一级大片在线观看-日韩av有码免费观看| 精品国产综合一区二区三区-蜜臀一区二区三区刺激视频| 亚洲福利视频免费观看-中文字幕日本不卡一区二区| 亚洲欧美另类综合偷拍-婷婷社区综合在线观看| 国产综合日韩激情在线-日韩精品人妻一专区二区三区| 人妻丝袜中文字幕在线视频-亚洲成av人片一区二区三区| 国产一区二区三区四区五区麻豆-欧美一级在线视频播放| 色婷婷六月婷婷一区二区-91草草国产欧美在线观看| 欧洲精品一区二区三区中文字幕-91久久国产综合久久蜜月精品| 日本中文字幕啊啊啊啊-久久精品伊人久久精品伊人| 亚洲一区二区免费av-中文字幕人妻久久久一区二区三区| 亚洲av乱码一区二区-九九免费在线观看视频| 亚洲福利视频免费观看-中文字幕日本不卡一区二区| 亚洲午夜久久久精品影院-性感美女在线观看网站国产| 久久网址一区二区精品视频-日产国产欧美视频一区精品| 91亚洲美女视频在线-熟妇人妻精品一区二区三区蜜臀| 日韩亚洲一区二区三区av-欧美综合在线观看一区二区三区| 欧美日韩精品人妻在线-在线播放中文字幕一区| 少妇一区二区三区粉嫩av-国产精品区久久久久久久| 99热在线精品免费6-av一区二区在线观看| 亚洲国产欧美日韩不卡-熟妇激情一区二区三区| 日韩精品中文在线观看一区-亚洲bt欧美bt精品| 黄片免费观看视频下载-国产丝袜诱惑在线视频| 欧美看片一区二区三区-人妻无卡精品视频在线| 99在线观看精品视频免费-国产极品一区二区三区四区| 亚洲黄片三级三级三级-国产成人一区二区在线视频| 一区二区三区女同性恋-熟妇高潮一区二区高清网络视频| 国产小黄片高清在线观看-涩涩鲁精品亚洲一区二区| 久久蜜桃精品一区二区-麻豆视频啊啊啊好舒服| 熟妇勾子乱一区二区三区-欧美爱爱视频一区二区| 麻豆久久国产精品亚洲-日本理论中文字幕在线视频| 天天干天天日天天射天天舔-精品香蕉视频官网在线观看| 中文字幕日本在线资源-国产+成+人+亚洲欧洲自线| 精品亚洲卡一卡2卡三卡乱码-一区三区二插女人高潮在线观看| 99久久精品一区二区成人-麻豆国产av玩弄放荡人妇系列| 国产日韩电影一区二区三区-美女露双奶头无遮挡物| 日韩综合精品一区二区-丝袜美腿熟女人妻经典三级| 亚洲国产精品一区二区av-日本一级黄色一区二区|